Supported Sepac Smart RAF Setting 

In SEPAC version 5.4.1 and later, where RAF (Red After Flash) is supported, the operation works as follows:

On power up or after a cabinet flash condition, the cabinet exits the pre-configured Flashing Yellow channels (typically set using Flash jumpers or plugs) to the controller's Steady Yellow [set in screen M-4-2-3, Cabinet Flash Settings]. It then displays All Red for the duration of the longer of the Startup time or Red Revert time before proceeding to the Initialization sequence. The initialized sequence must be set to 4-Green and not 3-Yellow so as not to go from red back to yellow.